Related topics

SMP interrupt problem
I have reverted to 6.2 and here is the output of dmesg on the working release 6.2: FreeBSDGW# dmesg Copyright (c) 1992-2007 The FreeBSD Project. .... plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)>

K7S5A - Network Controller reported not working
You never did elucidate on why the onboard network controller was "not working". Depending on the vendor that puts together the motherboard, some will add If so then the onboard network adapter is working. Have you check your BIOS settings to ensure that you do not have the onboard network controller disabled?

Users unable to connect to VPN, Event ID 5783 and 5719
The problem is that after rebooting Vista Ultimate 64 bit, the computer will not connect to the internet again unless I roll back the drivers or update the drivers for the ethernet controller. it seems that the computer does not remember to keep the working settings and initialize the ethernet card to access the

Problem using Isdn4Linux
It makes no differance whether the dvd dma is set or not. also i have to have the microsoft intelimouse explora on USB as the PS2 mouse input freezes the ide controller 15 intel 82371 pci bus master 15 sec ide controller I suspect that your problems are coming from the location of your network card in PCI-1.

RTL-8185 Wireless Card Problems
... <Intel(R) PRO/1000 Network Connection Version - 6.7.2> port 0xd800-0xd83f m em 0xfe9e0000-0xfe9fffff irq 48 at device 1.0 on pci4 em0: Ethernet address: 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A fdc0: <floppy drive controller (FDE)>

Driver problem SCCM
A few minutes later: "This computer was not able to set up a secure session with a domain controller in domain <domain name> due to the following: Not enough storage is available to process this command. This may lead to authentication problems. Make sure that this computer is connected to the network.

Problems with Chelsio driver in CURRENT...
I have the videocard (non)sharing the IRQ with the SCSI controller and the network controller on another IRQ. This works fine (I use Linux). Rob -- +----------------------------------+--------------------------------------+ Rob Janssen pe1...@amsat.org | WWWhome: http://www.pe1chl.demon.nl/ | AMPRnet:

Bug#258909:
... office communicator Hello, I am trying communicator office server in a controller domain, i managed to install even with a certificate issued by another server in the local network. I exported the certificate server, and I imported in content->certified options in Internet Explorer continues not working.

CPU Number or Ethernet Card No.
That does not mean the driver is free and clear, perhaps we are reaching a fundamental resource limit in the controller, on the bus, on the enclosure or in are discussed ad-nauseam on the network, fingers pointing in all different directions. Good luck working on this issue now armed with this understanding!

How to know the Primary Domain Controller.
The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth1 iface eth1 inet dhcp Additional information: The My PHY-controller is Realtek RTL8211. I would try this: Edit /etc/udev/rules.d/z25_persistent-net.rules so that it looks like this (not including the

More Local Access Only problems
On the NAT router, do not enable the name resolution option (this is not compatible with AD) and do not enable the DHCP option. Just use it as the default gateway for the local network to NAT traffic to the LAN. "Mark Masters" <FakeEm...@yahoo.com> wrote in message news:ophjs3to0vi985mticb1666c9jlge7og88@4ax.com.

Problems USB Root Hub on K7 Pro ?
The network path was not found. Also I cannot ping either of these two workstations. I think maybe DNS is not working correctly. Is there any simple way to check out DNS? Any help would be appreciated. Please also provide an ipconfig /all from the domain controller and one of the workstations.

PROBLEM: Network and Sound mutually exclusive
This would be BIOS complaining about the configuration of the network controller within the BIOS settings. On some systems, I've disabled COM port 2 in BIOS. If using a dialup connection, everything should still work (COM port 1 is still available) but if not, easy to reverse the setting again.

TG3 network data corruption regression 2.6.24/2.6.23.4
82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02) 0000:00:01.0 PCI bridge: Intel Corp. 82865G/PE/P PCI to AGP Controller (rev 02) 0000:00:1d.0 USB .... Since the ati drivers worked in libranet, with the 2.4.26 kernel, I cannot figure out why 3d accel is not working, but the ati file ccannot be compiled

BE6 DVD Problem
Mark A. Davis m...@yy.laketaylor.org comp unix sco misc Daryl Sayers wrote: I have ODT 3.0 that has been running fine with a 8013EPC Network controller. We intend to got to 100Mb soon and so I upgraded the PC card to an EtherExpress 10/100. The cat 5 cable is connected to a Bay Networks 800 Hub.

Integrated Ethernet not working
Thanks everyone for the fast responses, but as is always the way within a couple of hours of posting the question I have found the answer - it's one of the USB settings in the BIOS that causes it. Advanced Menu - I/O Device Configuration - USB Device Mode. Set it to Disabled and the extra 'Network Controller' is

LAN "expert" problem
... bus> on pcib6 em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0x3000-0x301f mem 0xd8a20000-0xd8a3ffff,0xd8a00000-0xd8a1ffff irq 18 at device may not be enabled sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A sio1: [FILTER] fdc0: <floppy drive controller>

Problem with Network card and USB
I've got everything working except for the wired Ethernet and the Compaq buttons. The video and chipset driver from Compaq did not work at all but I found something The video works but not the wired Ethernet port. The only problem devices in devmgmt is the "Ethernet Network Controller" and 1 "Unknown device".

Isolated virtual domain controller
David P. Greer dpgr...@aros.net alt comp periphs mainboard asus L'acrobat wrote: Under WinXP, In device manager under 'other devices' I have listed a 'Network Controller' with a yellow question mark beside it. My onboard network adapter is lested under network adapters and works fine.

Diagnosing DNS problem
In windows 95 , no conflict is detected, but when i list the IRQs that are being used, it shows that my network controller is using the same IRQ as the USB controller or something like that. How can i disable this option? I think my network in windows 95 is not working because of this undetected conflict,